ARC-201: 2 Button Single Speed Radio Remote Control
Wireless Remote Control for EOT Cranes, Hoists & Industrial Applications
Introduction
Model: ARC-201
A Radio Remote Control is a wireless system that uses radio frequency (RF) technology to operate industrial machines such as cranes and hoists from a distance. It consists of two main units — a transmitter and a receiver — which communicate using radio waves.
The transmitter sends encoded signals via an antenna, while the receiver decodes and executes commands. These systems are widely used for safe, efficient, and contact-free control of material handling equipment.
Included Components:
- Transmitter: 1 Emergency Stop, 1 Stop Button, 1 Start Button, Signal & Low Battery Indications
- Receiver: 1 Start Relay, 1 Alarm Relay, 1 Safety Relay in series, with 4-core control cable
- LED Indicators for Signal, Power & Start Relay Status
Watch ARC-201 Remote Control
Demonstration of Anand Systems ARC-201 2 Button 1 Speed Wireless Remote for EOT Cranes
How Radio Remote Control Works
Signal Transmission & Reception
The transmitter’s antenna emits encoded RF signals that are picked up by the receiver’s antenna. A band-pass filter allows only the desired frequency (2.4GHz) to pass through while rejecting other frequencies.
Multiple radio signals exist in the air simultaneously; hence, the antenna must be tuned precisely to the required frequency for reliable performance.
For monopole or dipole antennas, the antenna length depends on the wavelength (λ) of the frequency:
λ = c / f — where c is the speed of light and f is the frequency.
Key Features
- IP65 Certified – Water & Dust Resistant
- Internal Antenna Protection from Environmental Damage
- LED Indications for Power, Signal & Start Status
- Pre-labelled Wiring Diagram for Easy Installation
- Durable Polycarbonate Receiver Enclosure
Technical Data
| Frequency Band | 2.4 GHz (ISM Band) |
|---|---|
| Spread Spectrum | Direct Sequence Spread Spectrum (DSSS) |
| Number of Channels | 16 |
| Channel Bandwidth | 2 MHz |
| Co-existence Support | Up to 100 Radios |
| Transmit Power | Auto Power (Configurable -17dBm to +4dBm) |
| Range (Line of Sight) | Up to 200 Meters |
| Communication Type | Half Duplex, Closed Loop |
| Receiver Sensitivity | -103 dBm |
Warranty & Support
The ARC-201 Remote Control is backed by a 2-year warranty from the date of dispatch.
Contact Us:
📞 91376 20579 | 📧 info@anandcontrol.in
Visit: www.anandcontrol.in